87
AUTO POWER SAVE
The camera will turn off the data panel to conserve battery power if no operation is made within a
certain period. The length of this period can be changed to 1, 3, 5, or 10 minutes. The auto-power-
save option will not affect the display period of the LCD monitor; it will shut down after 30 seconds.
To restore the displays when they shut down, simply press the shutter-release button.
When the camera is connected to the computer, the auto-power-save period is set to ten minutes.
This period cannot be changed.
BEEP
The audio signal can be turned off or on. The sound effects setting simulates a film camera when the
shutter is released.
LANGUAGE
The language used in the menus can be changed.
To Next Page
Loading...
