i
1151SBD0000A
u For the Utmost safety u
DForreplacementparts,usethe genuinepartswiththeir partnumbersspecifiedin thepartsmanual.Use
of a wrong part could cause an overload or dielectric breakdown resulting in an electric shock or fire.
DReplacea blownfuseor thermalfuse withthe correspondinggenuine partwith itspart numberspecified
in the parts manual. Use of a fuse with a different rating or one with the same rating but of a different
type can result in a fire.
Especially when a thermal fuse blows frequently, the thermal control system is probably faulty.
Be sure to take necessary action.
DBeforeattempting todisassemblethe machine,besure tounplugits power cord.Themachinecontains
a high voltage unit and a circuit with a large current capacity that may cause an electric shock or burn
from sparking.
The machine also contains quick moving parts, which could injure a person.
If the machine uses a laser, a person can lose his/her eyesight by a laser beam leak.
DWherever feasible, keep the covers and parts mounted when energizing the machine.
If it is absolutely necessary to energize the machine with its cover removed, do not touch an exposed
part that is being charged and use care not to allow your clothing to be caught by a timing belt, gear,
or other moving part.
DDo not leave the machine unattended while it is being energized.
Warning
!
DToactuateaninterlockswitchwithacoverremovedoropened, besuretousetheinterlock switchactu-
ating jig. Use of folded paper can damage the interlock switch mechanism.
Caution
!
To Next Page
Loading...
