20-Bin Staple Sorter
Taking hold of the Lock Release Lever
of the Staple Sorter, slide the Staple
Sorter away from the copier.
1
1136O166AA
1136O166AA
Open the Stapler Door.
2
1136O011AA
While pressing the Staple Cartridge
Release Lever down in the direction of
the arrow, pull the Staple Cartridge out
of its port.
3
Pull the staple belt about 3 cm (1 inch)
out of the new Staple Cartridge and
break off that portion.
4
1139O0970A
1134O076AA
Check that no portion of the staple belt
hangs out of the cartridge. Break off
any portion of the belt that hangs out of
the cartridge.
NOTE
Insert the new Staple Cartridge in the
direction of the arrow until it clicks
into position.
5
1136O013AA
Close the Stapler Door and slide the
Staple Sorter back against the copier.
6
Place a sheet of paper into the 1st Bin
of the Staple Sorter.
7
1149O400AA
Non-Sort Bin
1st Bin
1149O401AA
Chapter 5
When a Message Appears
3. When the Message "The Staple Cartridge is empty." Appears
112
To Next Page
Loading...
