▲
Load the originals crosswise.
If the originals are loaded lengthwise, the directions of the copy images will be mixed up.
Some Precautions for Making Copies
Use the following procedure when loading originals to make 1-sided copies from 2-sided originals
(2 1).
▲
Loading the Originals
Correct:
2-Sided Originals
Loaded Crosswise
1-Sided Copies
1151O023AA
Incorrect:
2-Sided Originals
Loaded Lengthwise
1-Sided Copies
1151O022AA
Precautions for Book Copying
•
Ensure that the top edge of the book is at the rear
side.
•
Make copies in descending order of page.
•
When Book Copy is selected, the zoom ratio is
automatically set to ×1.000. Select the desired
zoom ratio and copy paper size.
•
User’s Choice allows you to program a default
zoom ratio, paper size, margin setting, and erase
setting.
➭
p. 87
Placing the Book on the Glass Correctly
•
When the 2-in-1 function is selected, the copier automatically selects a reduction ratio. You
can nonetheless make a full-size copy.
•
If the Frame + Center Erase function is selected, you can eliminate shadows which would
otherwise be produced along the edges and down the center of the copy.
•
User’s Choice allows you to program a default zoom ratio, paper size, margin setting, and erase
setting.
➭
p. 87
Precautions for 2-in-1 Copying
Chapter 3
Making Copies
5. Selecting the Original Copy Type
46
To Next Page
Loading...
