The copier provides a file margin along the leading edge for your ease in filing.
There are four different ways available for making a file margin. Use the one that is most suited
to your need.
File Margin
Functions
Copy
Shift-for-Margin
Original
1149O059AA
The image of the original is shifted in the crosswise
direction to make a margin along the left edge of the copy.
•
The margin width can be selected from among 5mm,
10mm, 15mm and 20mm.
Original Copy
1149O060AA
The image of the original is shifted in the crosswise
direction to make a margin along the right edge of the
copy.
•
The margin width can be selected from among 5mm,
10mm, 15mm and 20mm.
Margin-by-Reduction
Original Copy
1149O061AA
The image of the original is reduced to make a margin
along the left edge of the copy.
•
The margin width can be selected from among 5mm,
10mm, 15mm and 20mm.
Original
Copy
1149O062AA
The image of the original is reduced to make a margin
along the right edge of the copy.
•
The margin width can be selected from among 5mm,
10mm, 15mm and 20mm.
If the image of the original covers the entire
surface of the original, Margin-by-Reduction
will ensure a copy with no lost image along the
edges.
Useful Tip
Chapter 3
Making Copies
7. Auxiliary Functions
72
To Next Page
Loading...
