Auto Dual Function
Each of the Sort Bins holds up to 50 (*25) sheets of paper. The Auto Dual function, however,
allows sorting of copies of up to 100 (*50) originals under certain conditions.
All figures in the following text are given based on the 20-Bin Staple Sorter and 20-Bin
Sorter. Figures marked with * are for the 10-Bin Staple Sorter.
NOTE
Auto Dual Function in Sort Mode
When 10 (*5) or less copies are made from an original set consisting of more than 50 (*25) pages
in Sort Mode, the Auto Dual function is automatically activated to allow the Sorter or Staple
Sorter to continue sorting copies using the 11th (*6th) to 20th (*10th) Bins.
Copies Bins Used
1st to 50th (25th) sorted copies 1st to 10th (*5th) Bins
51st to 100th (*26th to 50th) sorted copies 11th to 20th (*6th to 10th) Bins
•
If the number of copies selected exceeds 10 (*5), the copy cycle stops at the 50th (*25th) original.
Example: Making 3 copy sets of a 30-page
original set using a 10-Bin Staple
Sorter
Each of the top three bins
contains 25 sorted copies.
Each of the 6th to 8th Bins
contains 5 sorted copies.
30-Page Original Set
Auto Dual Function in Sort Staple Mode
To have a complete set from the originals, place the copies from the 6th Bin on top of those from the
1st Bin. In the same way, place the copies from the 7th Bin on top of those from the 2nd Bin, and so
on.
When 10 (*5) or fewer copies are made from an original set consisting of more than 51 (*26)
originals in Sort Staple Mode and Auto Dual is activated, Sort Staple is automatically switched
to Sort (no stapling takes place).
Chapter 3
Making Copies
6. Finishing Mode
56
To Next Page
Loading...
