Open the Right Door and pull out the
sheet of paper from the Paper Take-Up
Section.
7
Close the Right Door.
8
Slide out the 1st Drawer and unload
the paper from the Drawer.
9
Fan the paper thoroughly and reload it
in the Drawer.
10
Slide the Drawer back in.
11
Open and close the Front Door to reset
the misfeed indication/message on the
Touch Panel.
13
In the same way, unload and reload the
paper stack in the 2nd Drawer.
12
1134O052AA
1134O023AA
1134O019AA
1136O040AA
After removing the misfed sheets of
paper, start the copy cycle following
the message on the Display.
NOTE
Chapter 5
When a Message Appears
4. When the Message "A paper misfeed has been detected." Appears
116
To Next Page
Loading...
