Minolta EP4000 - Page 81

Touch
Edge/Frame Erase
.
1
You must follow certain rules when
placing the original.
"Loading the Originals for Edge/Frame
Erase" ➭ p. 76
NOTE
Place the original.
2
1149O355CA
Using a Particular Edge/Frame Erase Function
Select the particular erase function
("Position").
3
Select the erase "Width."
4
Touch
Enter
.
5
Press the Start Key.
The copy cycle is run for Edge/Frame
Erase.
6
1149O357DA
1149O357DA
The erase width represents that on the
copy, not on the original. So, use care
when making a reduction or enlargement
copy.
Example: Erasing the center of an A3
size book original on a copy
reduced by ×0.707.
NOTE
1145O414AA
15mm
20mm
~0.707
Copy
(A4 lengthwise)
Book Original (A3)
1145O414AA
✕ 0.707
15mm
20mm
If you want to erase the 20mm-wide center
margin on the original, that is reduced to
14mm on the copy, select 15mm for the erase
width.
Chapter 3
Making Copies
7. Auxiliary Functions
75