19
Date: MM / DD / YYYY (the date can only be displayed in this format)
Time: HH:MM:SS (the time can only be displayed in a 24-hour format)
3. Press the UP or DOWN buttons to change the any of the values of the date and time.
When you are satisfied with the highlighted value, press the OK button to confirm that
value and proceed to the next value.
Once you are completed, press the MENU button twice to save your setting and exit. Your
camcorder will return to the main status screen of the current mode.
4.4.7 Format Memory Card
This setting allows you to erase all video and photo files stored on your memory card.
1. In any mode, press the MENU button twice. Select ‘Format Memory Card’ by using the
UP or DOWN buttons. Press the OK button to enter the ‘Format Memory Card’
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from No and Yes.
3. Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
NOTE: Use extreme caution when accessing this setting. There is no way to recover
formatted media. Once you format your memory card, the previously stored files
cannot be recovered.
4.4.8 Reset To Default Settings
This setting allows you to reset all menu settings to the factory default settings. This function
will not delete any media stored on your memory card.
1. In any mode, press the MENU button twice. Select ‘Reset To Default Settings’ by using
the UP or DOWN buttons. Press the OK button to enter the ‘Reset To Default Settings’
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from No and Yes.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
To Next Page
Loading...
