2
user’s manual
digital camera
Warranty Policy
This camera is under warranty for one full year from the date of purchase by the original purchaser.
In case of defects in materials or workmanship, we will replace or repair the camera free of
charge. This warranty applies to the camera only. This warranty does not include batteries, or
other accessories which have not been manufactured by our company. This warranty will not be
honored if the camera has been mishandled or tampered with, or altered by anyone other than
the manufacturer. Other than for the warranty herein, we are not responsible for loss, damage, or
inconvenience of any kind. A defective camera being returned under warranty must be
accompanied by a brief description of the difficulties encountered and also by a proof of purchase
with the date of purchase clearly indicated. All related transportation costs and insurances are at
the owner’s expense. Any alteration of this warranty cannot be made without the written approval
from our company.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in commercial installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, detectable by turning the equipment in question off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna; Increase the distance between the
equipment and the receiver; Connect the equipment to an outlet on a different circuit than that
which the receiver is connected to; Or consult the dealer or an experienced radio/TV technician
for help.
NOTE
A shielded-type DC power cable incorporated with a ferrite core is required in order to meet the
FCC emission limits and also to prevent interference to the nearby radio and television reception.
Use only shielded I/O cable incorporated with a ferrite core to connect this equipment to host
computer and TV set. Shielded A.C. power cable and shielded I/O cables are required in order to
meet the FCC emission limits. It is essential that only the supplied power cord and I/O cable(s)
can be used.
To Next Page
Loading...
Need help?
Camera Specifications
Weight and Dimensions
