Mio 168 - Connecting to AC Power and Charging the Battery

Connecting to AC Power and Charging the Battery
Fully charge the battery before starting to use your Pocket PC for the first time.
1. Plug the converter to the AC adapter.
2. Connect to AC power.

Connect the appropriate end of the ActiveSync cable to the bottom of
your Pocket PC.

Connect the appropriate end of the AC adapter to the power connector
on the ActiveSync cable.

Plug the other end of the AC adapter into a wall outlet.
Converte
r
Charge
Indicato
r
3. The charge indicator glows amber when charging is in progress. Do not
disconnect your Pocket PC from AC power until the battery is fully
charged, as indicated by the amber indicator turning into green. This will
take a couple of hours.
Whenever possible, keep your Pocket PC connected to the AC adapter and a
power source. Doing so keeps the battery charged.
7