22
Make sure that the electrical supply
is turned off at the mains and that the
water supply is fully turned off.
Remove the three screws and the
cover.
Caution! Handle the glass cover
assembly with care.
Inlet Filter - Cleaning/Renewing
Read the section “Important Safety Information” rst
Cover
Cover Retaining Screw
Maintenance
Handset - Cleaning
Clean with mild washing up detergent or soap solution. Wipe dry with a soft
cloth.
Poor shower performance can be avoided by cleaning the spray plate. Use thumb
or soft cloth to wipe rubber nozzles. The handset must be descaled regularly.
To Next Page
Loading...
