Start shower running, water is cold and
at maximum ow.
Turn power control to eco. Water
temperature rises, but stays cool.
Turn power control to high. Water
temperature rises further.
Stop shower and switch electrical
supply off.
Turn temperature control to mid-
temperature. Water remains cold, but
ow is reduced.
Turn shower off.
Remove lter from shower unit.
Push rod up until water ows freely.
Ret lter, turn until locked.
AIR IN SYSTEM ?
Turn temperature control to test water
temperature change. Water ow
adjusts automatically as you adjust the
temperature.
Residual water may drain for a few
minutes.
3
6
8
10
7
9
5
4
To Next Page
Loading...
