40
Sprayplate Cleaning
Sprayplate External Assembly
1. Use your thumb or a soft cloth to wipe any
limescale from the soft triangular nozzles
and the front face of the spray plate
assembly.
Sprayplate Internal Assembly
2. Remove the spray plate assembly. Refer to
section: ‘Maintenance, Spray plate
assembly - removal and installation’.
3. Remove the 'O' seals.
4. Clean all the components with a stiff brush.
If necessary use a plastic kettle descalent
in accordance with the manufacturer's
instructions.
5. Refit the components in reverse order.
6. Install the spray plate assembly. Refer to
section: ‘Maintenance, Spray plate
assembly - removal and installation’.
'O' Seals
Spray Plate
To Next Page
Loading...
Need help?
General
