Do you have a question about the Mircom FX-2003-6DS-16LED and is the answer not in the manual?
| Type | Fire Alarm Control Panel |
|---|---|
| Number of Zones | 6 |
| LED Indicators | 16 |
| Voltage | 24 VDC |
| LED Annunciator | Yes |
| Dimensions | 14.5" H x 12.5" W x 3.5" D (368 mm H x 318 mm W x 89 mm D) |
| Notification Appliance Circuits (NACs) | 2 Class B |
| Input Voltage | 120 VAC, 60 Hz |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Relative Humidity | Up to 93% non-condensing |
| Compliance | UL 864 |
Details settings and connectors for the main fire alarm module.
Settings for the main fire alarm super module, without addressable loops.
Module settings and jumper configurations for the DM-1008A module.
Settings, components, and jumper configurations for the SGM-1004A module.
Module settings and jumper configurations for the RM-1008A relay module.
Module settings, jumpers, LEDs, and connectors for the UDACT-300A.
Module settings, power, RS-485, DIP switches, and jumpers for ALC-198S.
Settings for ALC-396S dual loop controller, including power, RS-485, DIP.
Settings for ALC-H16 hardwire loop controller, including power, RS-485, jumpers.
Details terminal connections for the main fire alarm module.
Explains analog loop wiring configurations (Class B, Style 7, Style 6).
Terminal connections for the DM-1008A hardwire detection module.
Terminal connections for the SGM-1004A NAC signal module.
Terminal connections for the RM-1008A relay module.
Wiring instructions for the PR-300 Polarity Reversal and City Tie Module.
Details power supply connections and ratings for the FX-2000 system.
Pre-power-on checks for system installation.
Step-by-step procedure for powering up the fire alarm control panel.
Common troubleshooting messages and their solutions.
Describes how the system operates in a single-stage alarm mode.
Explains the operation of the system in a two-stage alarm mode.
Lists UL-compatible addressable loop devices for FX-2000.
Lists UL-compatible two-wire smoke detectors for FX-2000.
Table detailing power requirements for various FX-2000 modules.
Formula and guidance for calculating battery capacity.











