To Next PageTo Next Page
Need help?Do you have a question about the Mircom FX-351 SERIES and is the answer not in the manual?
General| Output Voltage | 24 VDC |
|---|---|
| Certifications | UL, ULC, CSFM, MEA |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Enclosure Type | Steel |
| NAC Circuits | 2 Class B (Style Y) |
Explains the operation of the buzzer for alarms, supervisory, and trouble conditions on the FX-350/351 Series panel.
Describes the System Reset button for resetting the fire alarm control panel and its associated circuits.
Explains the Signal Silence button's function to deactivate silenceable signal devices during an alarm.
Details the Fire Drill button for simulating a fire alarm without central station notification.
Describes the Buzzer Silence button for silencing the audible buzzer during a trouble or alarm event.
Illustrates an open trouble message for an input circuit and how to access trouble code info.
Shows an open circuit trouble message for an output and how to view trouble label and address.
Explains the 'AC Power Fail' message indicating the system is on battery backup.
Details the 'Battery Trouble' message when battery voltage drops below the minimum value.
Describes the 'Ground Fault' message indicating a fault on the field wiring.
Explains 'Data Link Error' for communication failure between panel and annunciator.
Details the 'Res. Aux. Pwr. Supply' message for a short on the resettable auxiliary power.
Describes the 'Aux. Power Supply' message for a short on the auxiliary power supply.
Explains the 'City Tie trouble' message indicating an open on the city tie output.
Lists potential causes for system failures, including installation, power, and component issues.
Outlines the two-year limited warranty for defects in materials and workmanship.
