Need help?Do you have a question about the Mircom FX-400 and is the answer not in the manual?
General| Brand | Mircom |
|---|---|
| Model | FX-400 |
| Category | Control Panel |
| Language | English |
Information about Ringer Equivalence Number (REN) and product identification for U.S. sales.
Details equipment compliance with FCC rules, ACTA, and type of service requirements.
Overview of the FX-400 FACP's capabilities, including addressable loops and NAC circuits.
Explains Circuits, Zones, Display Points, and Wiring Types for the system.
Details the key features of the FX-400 Fire Alarm Control Panel.
Lists and describes the main components of the FX-400 Fire Alarm Control system.
Lists compatible MGC MIX-4000 Series addressable devices and manual stations.
Provides dimensions and mounting details for the FX-400 enclosure.
Guidance on wiring organization and proper earth grounding connections.
Identifies and describes ports and jumpers on the main and core boards.
Lists modules that can be installed in the field, like PR-300 and PCS-100.
Shows module mounting and details PR-300 connectors and jumpers.
Information on the FX-400's addressable loop and device support.
Details various configurable input types like Alarm, Supervisory, Trouble, etc.
Defines Signal, Strobe, and Relay output types.
Details configuration and operation of NAC circuits.
How the system operates in a single stage mode.
Defines the available evacuation code patterns.
Explains the Positive Alarm Sequence operation and configuration.
Covers the operation and types of remote annunciators.
Details the built-in dialer functions and communication protocols.
How to access and navigate the panel's operation menu.
Procedures for setting time, password, and overview of reports.
Details on viewing alarm and general event logs.
Viewing device levels, alarm verification counts.
Accessing maintenance and M/P reports.
Clearing logs and performing system walk tests.
Performing selective walk tests and initiating bypass.
Procedures for bypassing devices, groups, and loops.
Using lists to bypass/unbypass devices.
Controls for auxiliary disconnect and dialer testing.
Operations for after hours, clearing verify counts, and PAS.
Describes the FX-400 display panel's controls and LEDs.
Details the four-line, 20-character alphanumeric LCD display.
Explains the function of each button on the numeric keypad.
AC On, Ground Fault, CPU Fault, Battery/Charger indicators.
Alarm, Supervisory, Trouble, Building queues, and System Reset.
Alarm Acknowledge, General Alarm, Signal Silence, Buzzer Silence.
Aux Disconnect, Visual Test, Fire Drill buttons, and Flash Rates.
Specifies maximum resistance, current, and capacitance for SLC loops.
Wiring requirements for RS-485 connections to annunciators.
Wiring tables for NAC and auxiliary power supply circuits.
Wiring requirements for conventional zone modules.
Guidance on routing power-limited wiring.
Diagrams showing Class B, Class A, and Class X addressable loop wiring.
Configuration options and diagrams for Class B and Class A NAC circuits.
Wiring diagram for the RTI-1 common remote trouble indicator.
How to wire the dialer to public and premises telephone lines.
Wiring diagram for connecting to a 3G4010CF interface device.
Wiring diagram for connecting to SLE-LTEV/SLE-LTEA interface devices.
Wiring details for the PR-300 Polarity Reversal and City Tie Module.
Instructions for wiring the main power supply unit.
Details supervision of AUX 2 and AUX 1 auxiliary power supplies.
Describes the unsupervised unfiltered auxiliary supply.
Pre-power-up checks for wiring and components.
Steps for powering up the FX-400 panel.
Diagnosing and resolving circuit troubles.
Diagnosing and resolving ground faults.
Diagnosing and resolving battery troubles.
Diagnosing common trouble indicators.
Overview of the command menu categories.
Details sub-menus within the configuration menu.
Settings for Fire Drill, Waterflow, Signal Silence, Strobes, etc.
Editing device labels, user messages, and language settings.
Procedures for Auto Config and Reset Config.
Lists event codes for Ademco Contact-ID reporting protocol.
Lists event codes for SIA Format Protocol.
Provides detailed specifications for the FX-400 FACP.
Lists specifications for system modules and annunciators.
Details power requirements for various components in amperes.
Formula for calculating battery capacity.
Guidance on selecting appropriate battery sizes and recommended models.
Important general warnings and application notes for all users.
Warnings and responsibilities for installers regarding system function.
Information for end-users on system operation, limitations, and hazards.
Warnings related to wireless devices, sensors, software, and integrated products.
Information on purchasing and obtaining product warranty details.
To Next Page