Need help?Do you have a question about the Mircom FX-401 and is the answer not in the manual?
General| Brand | Mircom |
|---|---|
| Model | FX-401 |
| Category | Control Panel |
| Language | English |
Details compliance and notices for UDACTs sold in Canada and USA, including FCC rules.
Provides an overview of the FX-401 FACP's features and capabilities.
Lists the core components and features of the FX-401 FACP.
Details the various components that make up the FX-401 system.
Details mechanical installation for the backbox and provides general installation tips.
Explains board connectors, jumpers, and guides for installing adder modules.
Explains configuration, supervision, input/output types, and device operations.
Covers NAC circuit operation, single/two-stage alarms, and evacuation codes.
Details Positive Alarm Sequence, remote annunciators, and dialer functions.
Covers accessing and using the operation menu for system settings and reports.
Describes the panel's main display, LEDs, and control buttons.
Provides detailed descriptions of the panel's individual LEDs and control buttons.
Provides wiring tables, routing guidelines, and addressable loop wiring diagrams.
Covers NAC, power supply, interface device, and module wiring procedures.
Outlines checkout, troubleshooting, and FCC ferrite placement.
Lists compatible Digital Alarm Communicator Receivers (DACR) for the FX-401.
Explains accessing the command menu and configuring system features.
Covers auto configuration, reset config, and editing device labels.
Lists event codes for Ademco Contact-ID and SIA Format reporting.
Provides detailed technical specifications for the FX-401 FACP and its modules.
Guides on calculating battery capacity and selecting appropriate batteries.
Contains critical warnings and safety information for all users and installers.
To Next Page