Mircom FX-401 User Manual

76
8.0 Appendix A - Compatible Receivers
The dialers that are built into select models of the FX-401 Fire Alarm Control Panels are
compatible with the following Digital Alarm Communicator Receivers (DACR) listed:
Table 18 Compatible DACR Receivers
DACR Receiver Model Protocols
SurGard MLR2 Multi-Line Receiver (ULC, ULI Approved) SIA Format Protocol and SIA Contact ID
SurGard SLR Single-Line Receiver (ULC, ULI Approved) SIA Format Protocol and SIA Contact ID
Osborne-Hoffman Quickalert! II Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Osborne-Hoffman OH-2000 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Silent Knight Model 9500 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Radionics Model D6500 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Radionics Model D6600 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
DSC SurGard System III Receiver (ULC, ULI Approved
*)
SIA Contact ID
DSC SurGard System IV Receiver (ULC, ULI Approved
*)
SIA Contact ID
DSC SurGard System 5 Receiver (ULI Approved
**)
SIA Contact ID
Note: *ULI and ULC Approved when used with DSC 3G4010 or 3G4010CF Universal
Wireless Alarm Communicator through wireless IP connection.
Note:
**ULI Approved when used with NAPCO Starlink SLE-LTEV or SLE-LTEA
Universal Wireless Alarm Communicator through wireless IP connection.
i

Mircom FX-401 Specifications

General

Brand	Mircom
Model	FX-401
Category	Control Panel
Language	English