What to do if Mircom Control Panel shows battery trouble?
If your Mircom Control Panel indicates a battery trouble, it means the voltage is low (below 20.4V). The solution is to replace the batteries as soon as possible.
How to fix a ground fault on a Mircom FA-301-12LDR Control Panel?
To resolve a ground fault on your Mircom Control Panel, check for any external wiring touching the chassis or other Earth Ground connection.
What causes common trouble on a Mircom FA-301-12LDR Control Panel, and how to resolve it?
Common trouble on a Mircom Control Panel can arise from a few potential issues: missing interconnection wiring, a missing module that was part of the configuration, or improperly secured cabling. Check each of these to resolve the problem.
How to troubleshoot a circuit trouble on a Mircom Control Panel?
To troubleshoot a circuit trouble on your Mircom Control Panel, check for open wiring on that particular circuit loop. Also, ensure that the Circuit Disconnect Switch is in the ON or CLOSED position.
Wiring devices to the main panel.
Diagrams for Class B and Class A initiating circuits.
Diagrams for Class B (Style Y) and Class A (Style Z) indicating circuits.
Diagram for connecting the power supply and batteries.
Steps to perform before connecting power.
Steps to power on and initialize the panel.
Common issues and their solutions.
Explanation of system status LEDs.
Details on LEDs for initiating and indicating circuits.
Steps to enter the system's configuration menu.
How to use the command menu structure.
Overview of the main configuration options.
Detailed settings for system features.
Settings for the system's dialer functionality.
Interpretation of AC power, battery, and ground faults.
General| Type | Fire Alarm Control Panel |
|---|---|
| Model | FA-301-12LDR |
| Input Voltage | 120 VAC, 60 Hz |
| Number of Zones | 12 |
| Compatibility | Mircom compatible devices |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Relative Humidity | Up to 93% non-condensing |
| Weight | 8 lbs |
| Output Current | 2.0 A (total alarm current) |
To Next Page
