Mircom FA-301-12LDR User Manual

75
Configuration with the CFG-300 LCD Service Tool
11.6 4. Change password (Command-Menu)
11.7 5. View Event Log (Command-Menu)
The event log looks the same as the normal event queue (see 11.15 Zone messages on
page 89). Press the INFO button to see more information about the event. Figure 41 shows an
example of how the INFO button works.
Figure 41 The event log
The event log saves a maximum of 200 events.
Note: Refer to 11.2.1 Using the Keypad to Program the FA-300 on page 61 for detailed
instructions on making menu selections.
If the passcode does not match, the
following message appears:
If the passcode is OK the following
message appears:
1 -> Default
Use this menu to change
the passcode. The minimum
number of digits is 4 and the
maximum is 10. Only
numeric digits are allowed.
i
Enter new passcode
[ ]
Re-enter passcode
[ ]
invalid passcode
Passcode updated
EAST LOBBY ENTRANCE
OPEN TRB 01/09
VERIFIED ALARM Z-01
2002/10/22 11:45.AM
ZONE
Message
EVENT
01 of 09
Process
Type
Physical
Zone No.
DATE
TIME
"INFO" Key
EVENT
type
ZONE
Message
EVENT
type
INFO
Process
Type
Physical
Zone No.
Time

Mircom FA-301-12LDR Specifications

General

Brand	Mircom
Model	FA-301-12LDR
Category	Control Panel
Language	English