J
Jason GutierrezAug 11, 2025
Why Mircom Control Panel shows battery trouble?
- DDouglas CherryAug 11, 2025
Low voltage (below 20.4V) will cause a battery trouble. Replace the batteries as soon as possible.
To Next PageTo Next PageWhy Mircom Control Panel shows battery trouble?
Low voltage (below 20.4V) will cause a battery trouble. Replace the batteries as soon as possible.
What to do if Mircom FA-200 shows ground fault?
Check for any external wiring touching the chassis or other earth ground connection.
What to do if Mircom FA-200 Control Panel shows remote fail?
Check for any failure reported by, or failure to communicate with a remote annunciator, DACT-100A, or PR-100.
General| Type | Fire Alarm Control Panel |
|---|---|
| Hertz | 60 Hz |
| Voltage | 120VAC |
| Operating Temperature | 0°C - 49°C (32°F - 120°F) |
| Zones | Class B |
| Humidity | Up to 85% relative humidity (non-condensing) |
