Mircom FX-2017-12ADS - User Manual

For the latest compatability information visit www.mircom.com/deviceguide
FX-2000
Intelligent Analog Fire Alarm Control Panel
LT-657 Rev 15
December 2016
Installation and Operation Manual

Summary

Mechanical and Chassis Installation

Chassis Installation

General instructions for installing the main chassis.

Module Settings

Main Fire Alarm Modules (MD-764 Part of Main Chassis)

Configuration settings for the main fire alarm module.

Main Fire Alarm Super Module (MD-757 Part of “S” Version Main Chassis)

Configuration for the main fire alarm super module.

DSPL-420 Main Display Module

Settings and connections for the DSPL-420 main display module.

Optional DSPL-420-16 TZDS Display Module

Settings and connections for the DSPL-420-16TZDS display module.

RAX-1048 TZDS Zone Display Module

Settings and connections for the RAX-1048TZDS zone display module.

IPS-2424 DS Programmable Input Switches Module

Settings and connections for the IPS-2424DS input switches module.

Fan Damper Control Display Module (FDX-008 W;WKI)

Settings and operation for the fan damper control display module.

DM-1008 A Hardwire Detection Adder Module

Configuration and wiring for the DM-1008A detection adder module.

SGM-1004 A Hardwire NAC Signal Adder Module

Configuration and wiring for the SGM-1004A NAC signal adder module.

RM-1008 A Hardwire Relay Adder Module

Configuration and wiring for the RM-1008A relay adder module.

Polarity Reversal and City Tie Module (Model PR-300)

Configuration and wiring for the PR-300 polarity reversal/city tie module.

UDACT-300 A Main Board

Settings and connections for the UDACT-300A main board.

ALC-198 S Single Intelligent Analog Loop Controller Module

Configuration and connections for the ALC-198S loop controller module.

ALC-396 S Dual Intelligent Analog Loop Controller Module

Configuration and connections for the ALC-396S loop controller module.

ALC-H16 Hardwire Loop Controller Module

Configuration and connections for the ALC-H16 hardwire loop controller module.

Field Wiring

Main Fire Alarm Module Terminal Connections

Wiring details for the main fire alarm module terminals.

Analog Loop Wiring

Wiring diagrams for analog loop connections.

Loop Terminal Connections - Style 7

Wiring configuration for analog loops using Style 7.

Loop Terminal Connections - Style 6 (Formerly Class A)

Single Loop Terminal Connections - Class B

NAC Signal Module (SGM-1004 A) Terminal Connections

Terminal connections for the SGM-1004A NAC signal module.

Relay Module (RM-1008(A)) Terminal Connections

Terminal connections for the RM-1008A relay module.

Polarity Reversal and City Tie Module (PR-300) Wiring

Wiring instructions for the PR-300 polarity reversal and city tie module.

UDACT-300 A Main Board Terminal Connections

Telephone line wiring for the UDACT-300A main board.

Power Supply Connections

System Checkout

Before Turning the Power On

Power-Up Procedure

Step-by-step guide for powering up the system.

Troubleshooting

Common system issues and their solutions.

Operation

Single Stage Operation

Two Stage Operation

Pre-Signal Operation

UUKL feature

Output Circuit Delay Operation

Initiating (Detection) Circuit Type

NAC (Signal) Circuit Types

Appendix F: Alarm Verification Timing

Appendix G: Wiring For Supervised Output Module

Mircom FX-2017-12ADS Specifications

General

Brand	Mircom
Model	FX-2017-12ADS
Category	Control Panel
Language	English