Mircom FX-400 User Manual

69
8.0 Appendix A - Compatible Receivers
The built-in dialer of the FX-400 Fire Alarm Control Panel is compatible with the following
Digital Alarm Communicator Receivers (DACR) listed:
Table 16 Compatible DACR Receivers
DACR Receiver Model Protocols
SurGard MLR2 Multi-Line Receiver (ULI approved) SIA Format Protocol and SIA Contact ID
SurGard SLR Single-Line Receiver (ULI approved) SIA Format Protocol and SIA Contact ID
Osborne-Hoffman Quickalert! II Receiver (ULI approved) SIA Format Protocol and SIA Contact ID
Osborne-Hoffman OH-2000 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Silent Knight Model 9500 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Radionics Model D6500 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
Radionics Model D6600 Receiver (ULI Approved) SIA Format Protocol and SIA Contact ID
DSC SurGard System III Receiver (ULI Approved)* SIA Contact ID
DSC SurGard System IV Receiver (ULC, ULI Approved) SIA Contact ID
DSC SurGard System 5 Receiver (ULI Approved)* SIA Contact ID
Note: *Approved when used with DSC 3G4010CF or NAPCO Starlink SLE-LTEV or SLE-
LTEA Universal Wireless Alarm Communicators through wireless IP connection.
i

Mircom FX-400 Specifications

General

Brand	Mircom
Model	FX-400
Category	Control Panel
Language	English