70
9.0 Appendix B - Manual Panel
Configuration
COMMAND MENU
The command menu is the first menu displayed for command mode. The command menu is
divided into four main sub menu categories, the configuration allows full front panel
configuration of the system and the operation menu performs certain operations which may
not be possible using the common control switches and indicators on the front panel.
-- Command menu --
1. Configuration
2. Auto config.
3. Operation
4. Reset Config
COMMAND MENU/ 1. CONFIGURATION MENU
The configuration menu is divided into the following sub menu items:
-- Configuration --
1. Panel config
2. UDACT config
3. Time config
4. AfterHrs cfg.
CONFIGURATION MENU/1. PANEL CONFIGURATION
The panel configuration is further sub divided into the following sub menus
-- Panel Config --
1. Features
2. Address cfg.
3. Device label
4. User message
5. Language
PANEL CONFIGURATION/1. FEATURES
The features described are the overall features of the system and their impact is system wide.
The default setting in some features is shown as selected.
Panel Configuration/Features/Manual Signal Silence
Manual Signal Sil.
[x] Enabled
The manual signal silence option will allow silencing of the signal, from the common control
signal silence switch, when they are active.
To Next Page
Loading...
