Mirion Technologies MBD-2 - Figure 6: Preparing the Wrist Strap; Figure 7: Donning the MBD-2 and Securing the Wrist Strap

MBD-2 Operating Manual 10
15-00167, Rev 1
d. Feed the Wrist Strap through its own ring to form a loop as shown below.
e. Pull the strap all the way through until it stops at the black metal loop. Feed the course
hook end back though the metal loop as shown below in Figure 6, Preparing the Wrist
Strap.
Figure 6: Preparing the Wrist Strap
f. Insert hand through the loop, pull the strap around itself and securely fasten as shown
below in Figure 7, Donning the MBD-2 and Securing the Wrist Strap
Figure 7: Donning the MBD-2 and Securing the Wrist Strap
E
F