MIRKA CEROS - U.S. WARRANTY

2
7
Declaration of conformity
KWH Mirka Ltd.
66850 Jeppo, Finland
declare on our sole responsibility that the product
150 mm (6 in.) & 125mm (5 in.) 10,000 RPM Electrical Random Orbital Sander (See “Product Configuration/Specifications” Table
for
particular Model) to which this declaration relates is in conformity with the following standard(s) or other normative
document(s) EN ISO
EN 60 745, EN 55 014, EN 61 000 in accordance with the
regulations 2006/42/EC , 2004/108/EC.
Jeppo 1.12.2008
_____________________ ____________________________ ____________________________
Place and Date of issue Name
Tom Nordström Vice President
Operator Instructions
Includes – Warranty, Please Read and Comply, Proper Use of
Tool, Work Stations, Putting the Tool Into Service, Operating
Instructions, Product Configuration/Specifications Tables,
Parts Page, Parts List, Sander Spare Parts Kits, Trouble
Shooting Guide, Service Instructions
Important
Read these instructions
carefully before installing,
operating, servicing or
repairing this tool.
Keep these instructions in a
safe accessible location.
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Required Personal Safety Equipment
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Input Voltage
90-240 VAC
Warranty
The warranty terms are as follows:
- 12 months on KWH MIRKA electrical tools.
The warranty period commences at the date of purchase. The warranty only covers imputable material and manufacturing
defects.
Parts replacement or repair during the warranty period is free of charge if carried out by an official KWH MIRKA service center.
Freight costs are always to be paid by the purchaser.
The warranty does not include:
Normal wear and tear i.e.
- Bearings, backing pad, shroud
- Industrial continuous usage
Overloading or improper use i.e.
- Dropping the tool in water
- Damage caused by misuse
- Damage caused by anything other than defects in material and workmanship
- Dropping or other excessive impact
Normal maintenance and service that can be carried out by the operator :
- Changing of the packing pad
- Changing of the spindle bearing
- Changing of the exhaust fitting
- Changing of the shroud
NB! All other service operations must be carried out by an authorized Mirka service center.
The warranty only covers the local repair, not the tool replacement.
Compensation for downtime and loss of production are explicitly not included in the warranty.
U.S. WARRANTY
The warranty terms are as follows:
• 3 years on KWH MIRKA CEROS electric sanders. Refer to www.mirka-ceros.com or the included
warranty card for complete information on the tool warranty.
The warranty does not include:
Normal wear and tear.
Overloading or improper use i.e.
• Dropping the tool in water
• Damage caused by misuse
• Damage caused by anything other than defects in material and workmanship
• Dropping or other excessive impact
Normal maintenance and service that can be carried out by the operator:
• Changing of the backing pad
• Changing of the exhaust tting
• Changing of the shroud
Note: All other service operations must be carried out by an authorized Mirka service center.
CONFORMS TO UL STD
60745-1, 60745-2-4
CERTIFIED TO CAN/CSA STD
C22.2 No. 60745-1, C22.2 No. 60745-2-4
Intertek
4001809
C US
CM
Input Voltage
110 VAC