Mitel 112 - Page 6

Mitel 112 DECT Installation Guide
Ver: 3.1
6
Step 4c: Start the SIP Registration.
After configuring the server, building the extension and pairing the DECT set, the last step is to
start the registration process between the DECT set and the synced base station. (see figure 9)
1. Click the Extensions menu
2. Click the Extensions tab
3. Check the box for the extension that you want to start.
4. Click Start SIP Registration(s)
Fig 9
A successful configuration is when the state shows – SIP Registered (see figure 10)
Fig 10