Mitel 5312 IP - Redial; Redial - Saved Number; Speed Call Keys

5312/5324 IP Phones User Guide
- 13 -
Redial
To redial the last number that you manually dialed:
1. Lift the handset (optional).
2. Press
(REDIAL).
Redial – Saved Number
To save the last number that you manually dialed:
• Lift the handset, and then dial the appropriate feature access code.
To Redial a saved number:
• Lift the handset, and then dial appropriate the feature access code.
Speed Call Keys
You may use Speed Call Keys to make a call or to send a string of digits during a call (press
a Speed Call Key during a call to send a multi–digit password, for instance).
To dial a stored Speed Call number:
1. Lift the handset.
2. Press a Speed Call key.
To store a Speed Call number:
1. Press
(MENU).
2. Press # or the No softkey until "Personal Keys?" appears.
3. Press * or the Yes softkey.
4. Press a personal key that isn't a line key.
5. Press * or the Change softkey
6. On a 5324 IP Phone only, press the Yes softkey.
7. Do one of the following:
• To enter a new number, dial the number (press
(HOLD) between digits to
create a one–second pause during dialing; press
(HOLD) more than once to
lengthen the pause.)
• To enter a trunk flash, press
(TRANS/CONF). (See "Trunk Flash" for more
information about the use of this feature.)
8. On a 5312 IP Phone only, press the personal key again.