Mitel 5312 IP User Manual

5312/5324 IP Phones User Guide
- 10 -
MAKING AND ANSWERING CALLS
Make a Call
1. Lift the handset (optional).
2. If you want to use a Non–Prime Line, press a Line Appearance key.
3. Do one of the following:
• Dial the number
• Press a Speed Call key
• Press
(REDIAL).
Answer a Call
Do one of the following:
• Lift the handset.
• Press
(SPEAKER).
• Press the flashing Line appearance key and lift the handset.
• Press the flashing Line appearance.
Emergency Calls
Warning for emergency number dialing: Consult your local authorities for Emergency
Numbers and 911 or equivalent service availability in your area. There are two methods of
dialing emergency numbers, based on the programming of your 3300 ICP:
• Emergency Call Routing NOT programmed
• Emergency Call Routing programmed
Caution: Verify with your System Administrator which type of emergency number
dialing you can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT
PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number dialing should only be
performed by picking up the handset and selecting the Line Interface Module key you have
programmed. If Privacy Mode is enabled and the Line Interface Module key local line is busy,
dialing will not occur on the Line Interface Module line. Emergency dialing using an IP
connection may not be supported due to ICP system configuration and country location. For
more information, contact your System Administrator.

Mitel 5312 IP Specifications

General

Speakerphone	Yes
Display	2-line backlit LCD
Audio	G.711, G.729a
Fixed Function Keys	Hold, Transfer, Conference, Mute, Volume
Network Ports	2 x 10/100 Mbps Ethernet
Power	Power over Ethernet (PoE) or AC adapter
Protocols	MiNet, SIP
Programmable Keys	12 programmable multi-function keys