5330/5340 IP Phones – User Guide
40
1. Press (SPEAKER).
2. Hang up the handset.
Auto-Answer
When the Auto-Answer feature is active, incoming calls ring briefly, and then the phone answers
the call in Handsfree mode. You can continue the call handsfree or use the handset.
To enable or disable Auto-Answer:
• Press Auto-Answer key. (See Programming Features on Your Keys for instructions on
programming features on your phone.) The key is highlighted and all incoming calls are
answered in Handsfree mode.
To switch from Handsfree mode to handset mode:
1. Lift the handset
To end a call, do one of the following:
• Press (Cancel)
• Press the Hang Up softkey.
• Wait for the caller to hang up.
Using the Analog line
The phone can support the Line Interface Module. See Using the Line Interface Module for more
information.
To Next Page
Loading...
