Mitel 5330 IP - Page 86

5330/5340 IP Phones – User Guide
86
Feature Function
3) Mute button Mute allows you to turn the microphone off during a
call.
4) Volume Up and
5) Volume Down buttons
Up and Down provide volume control for the ringer
and handset/headset.
Note: The IP Phone deactivates the cordless handset when a corded handset is plugged in.
Answer a call
Do one of the following:
• Lift the cordless handset.
• If the handset is already out of the cradle, press the hookswitch button on the handset.
Note: A call on a Line Appearance key answered while a call is on hold on the Prime Line, is
presented over the speaker.
Hang up
Do one of the following:
• Replace the cordless handset in the cradle.
• Press the hookswitch button on the handset.
Dialing – Auto Dial Disabled
To dial a number with Auto Dial disabled:
1. Lift the handset or press the hookswitch.
2. Make the call using the dial pad, or press a programmed speed dial key on the phone.
Dialing – Auto Dial Enabled
To dial with Auto Dial enabled:
• To dial the predefined Auto Dial number, press the hookswitch on the cordless handset or
headset.
To program Auto Dial, refer to Using the Cordless Devices Application on page 94.