SECURITY MENU
You must enter a PIN to open the Security menu. On delivery, this is set to 0 0 0 0 (4 zeros).
Voice messages Displays the number of stored voice messages. Press
Ok
to start the query. This voice box access is also
possible if (in idle state) the 1 key is pressed and held
for a moment.
Bluetooth
BT Status Shows whether Bluetooth is activated or not. Press
Change
to activate or deactivate.
Select headset Select the subscribed headset you want to use from
the list.
Subscribe headset Press New
to register a new headset for use on your
DECT phone. Also execute the necessary steps on
the headset (see the User Manual for the headset).
The DECT phone searches for any Bluetooth devices
within range for approximately 30 seconds. Select an
entry, press Ok
and enter the PIN of the headset. The
pairing starts.
To change the name or delete a Bluetooth headset,
press the softkey and select one of the following
options:
Edit: Change the name of a headset.
Delete: The registration data for the respective
headset is deleted after a confirmation prompt.
Phone lock The phone is locked. Only incoming calls can be accepted.
Any programmed emergency call key or SOS key on the Mitel 630d / 632d can
also be used. To remove the phone lock, see “Key lock/Phone lock” on page 25.
Change PIN You can change the PIN for the Security menu. Enter the new PIN and then
enter it again.
SOS call
SOS number Enter the phone number to be called during an
emergency call. The SOS emergency number is dialled
when you press the SOS key (Mitel 630d / 632d), a
programmed emergency key or by the Alarm sensor
(Mitel 630d, 632d - provided no Alarm number is
programmed).
This menu item is not displayed if the SOS emergency
number is predefined by the system.
To Next Page
Loading...
Need help?
General
