Configuring the fax server
23
Applications Card CPU2-S
syd-0620/1.1 – R4.0 – 01.2016
8. Set up the SMTP server (Configuration / IP network / Routing view) and ask
your IT manager to set up an SMTP connector for the Exchange Server
and to enter the fax domain in the Exchange Server.
9. Install the fax client application on the fax users' PCs. To do so, open the
Configuration / Multimedia / Client rollout view, send the installation link or
start the installation directly if you are working from the destination com-
puter.
To set up the fax service on the communication server via an analogue net-
work interface, proceed as follows:
1. Follow the above instructions step by step:2.
2. Assign the fax server as routing destination for the fax trunk group (Config-
uration / Call routing / Trunk group view, Routing destination = Fax server
setting).
3. Enter as base number the entire external call numbers of the fax extension
in canonical format (Configuration / Call routing / Trunk group view, Base
number setting).
4. In the fax recipient's user settings, select the set fax number and assign the
user a cover page (Multimedia section, Fax mailbox / Fax number setting
and Cover page setting).
5. Check whether an e-mail address has been entered (Configuration / User
view).
6. Continue with step 7 of the above instruction.
To Next Page
Loading...
Need help?
General
