Making enhancements with the customer’s own applications
33
Applications Card CPU2-S
syd-0620/1.1 – R4.0 – 01.2016
3. Put the system into operation according to the instructions under "Take the
applications card in operation", page 14.
4. Open WebAdmin and navigate to the Configuration / IP network view.
5. Either connect the monitor, keyboard and mouse directly to the applications
card or establish a remote desktop connection. The IP address for the re-
mote desktop connection can be seen in WebAdmin in the Configuration /
IP network view (IP address of the applications card setting).
6. Log on with the user name Administrator and with the default password
password.
7. Deinstall the pre-installed MiVoice Office 400 applications.
8. Set up the server in accordance with the customer’s requirements.
Connect the IP network to the front panel LAN socket, if you operate the applications card as inde-
pendent application server.
To Next Page
Loading...
Need help?
General
