Mitel 7106 - Mitel 7106 Call Handling; Managing Incoming Calls

Mitel 7106 User Guide – R2A
| LZT 102 4161 | Uen | R2A | 2014-12-09| 4
2 CALL HANDLING
2.1 INCOMING CALLS
To answer an incoming call
Lift the handset
Answer a second call
A call waiting tone will inform you, during conversation that a second call is waiting. You have two
options:
Option 1:
Replace the handset. The new call will be signaled on your phone
Lift the handset to receive the call.
Option 2:
1. Ask the party you are speaking with to wait
2. Press and replace the handset. The waiting call will start ringing.
3. Lift the handset to receive the new call
4. Press 2 to return to the first call (Sweden, press )
After finishing the call, replace the handset to receive the first call again
Answer a call from another extension
You can answer a call from another extension from any phone in your office:
1. Lift the handset and call the ringing extension.
2. You receive a busy tone, press numeric key, 8 (France:4 Sweden 6)
Mute ring signal
Press when the phone is in idle mode. Incoming calls are indicated by flashing of the mute LED.
Note: there is no indication that the ring signal is muted.
Do not disturb, DND
When you activate DND, calls to your extension is not shown.
Outgoing calls can be made as usual.
Activate DND:
Activate DND :
Lift the handset and press numeric keys * 2 7 #. Replace the handset.
Deactivate DND:
Lift the handset and press numeric keys # 2 7 #. Replace the handset