Mitel 7147 - Outgoing Call Procedures

Mitel 7147 User Guide – PR2C
| LZT 102 4162 | Uen | PR2C | 2016-03-04|
5
Call duration timer for incoming calls
A call duration timer for incoming calls starts 5 seconds after “off hook” status is established. The
caller ID is stored in the call list.
2.2 OUTGOING CALLS
Dial and Pre-dial
Dial
Pick up the handset or press for hands free / headset operation. Press numeric
keys, (if required also * # or to dial out)
Pre-dial
During on-hook, press the keys for the number to be dialed (max. 32 digits). press
to pick up the handset, the phone will dial out the number in 1,1s.
Call by Handsfree
1. Press and enter the number by using the dial pad.
2. To hang up the phone, press again.
3. When you are in handset mode, you can switch to handsfree mode by pressing
Call by Headset
Insert a headset to the phone
1. Press and enter the number.
2. To hang up the phone, press again.
3. When you are in handset mode, you can switch to headset mode by pressing .
Redial
1. Press , the display shows the last number you have dialed.
2. Lift the handset or press either to dial out.
Last External Number Redial
1. Lift the handset and press numeric key * * *
(Finland and Sweden: * * 0)