Mitel 7147 - Caller ID and Phone Settings

Mitel 7147 User Guide – PR2C
| LZT 102 4162 | Uen | PR2C | 2016-03-04|
16
3. Press [ ]
3.3 CALLER ID DISPLAY
After receiving a new incoming call, the number will be displayed on LCD and hold for 10s. During this
time, if received another new call, it will continue to display for 10s and display corresponding call.
Example: display content
“12:00 9/3” indicates the time and date.
12:00 9/3
0755123456
The call list shows incoming; missed and outgoing calls. Scroll down the list by pressing the call list
key repeatedly.
If the record is full, the next incoming call will replace the oldest record one by one.
 Missed call is indicated by the handset icon with a cross
 Incoming call is indicated by the handset icon with an arrow pointing to it
 Outgoing call is indicated by the handset icon with an arrow directed from the handset
12:08 8/3
22
131256585621
Note: “22” indicates the position number in the call list.
3.4 PHONE SETTING
Set Ring Volume
Three levels of ring volume is provided: High, Low, Ringer off
1. Place the handset on the phone
2. Press ‘Volume +’ to increase ring volume
3. Press ‘Volume –‘ to decrease ring volume.