Mitel 8528 - Troubleshooting; Error Messages and Contact Information

Mitel
®
8528 Telephone User Guide – Issue 3, February 2011 Page 53
Call Features
Changing the Station Passcode
You can use Remote Programming to change the station (telephone) passcode.
To change the station passcode using Remote Programming:
1. Do one of the following:
 Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
 Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #.
5. Dial 392.
6. Enter the new passcode followed by
#.
7. Enter the new passcode again followed by #.