M3820 Phone User Guide
Speed Call Keys
You may use Speed Call Keys to make a call or to send a string of digits during a call
(press a Speed Call Key during a call to send a multi-digit password, for instance).
To dial a stored Speed Call number:
1. Lift the handset.
2. Press a Speed Call key.
To store a Speed Call number:
1. Press SUPERKEY.
2. Press a personal key that isn’t a line key.
3. Press
MENU LEFT (Change).
4. Press
MENU LEFT (Yes).
5. Do one of the following:
• To enter a new number, dial the number. Press
HOLD between digits to create
a pause during dialing; press
HOLD more than once to lengthen the pause.
• To enter a trunk flash, press
TRANSFER. (See Transfer on page 13 for more
information about the use of this feature.)
6. Press
MENU LEFT (Save).
7. Press the selected personal key.
8. If you want to make the number private, press
MENU LEFT (Yes). Otherwise, press
MENU RIGHT (No).
9. Press
SUPERKEY to exit, or press a personal key to program another speed call
number.
Handsfree Operation
To use Handsfree Operation to make calls:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
2. Dial the number.
3. Communicate by using the speaker and the microphone.
To use Handsfree Operation to answer calls:
1. Press the flashing line key.
2. Communicate by using the speaker and the microphone.
To hang up while using Handsfree Operation:
• Press CANCEL.
10
To Next Page
Loading...
Need help?
General
