Mitsubishi Electric MELDAS MDS-R Series - 5-7 Relay

5. Peripheral Devices
5 - 10
5-7 Relay
Use the following relays for the input/output interface (contactor control signal or motor break control
signal: CN9).
Interface name Selection example
For digital input signal (CN9)
Use a minute signal relay (Example: twin contact) to prevent a contact defect.
<Example> OMRON: G2A, G6B type, MY type, LY type
For digital output signal (CN9)
Use a compact relay with rating of 24VDC, 50mA or less.
<Example> OMRON: G6B type, MY type
Downloaded from ManualsNet.com search engine