Appendix 4. EMC Installation Guidelines
A4 - 13
Example of using MX13 Series
As with the servo unit, the terminals are arranged on the front enabling ideal wire lead-out.
Refer to the following figure for details.
Noise filter (MX13 Series)
Servo unit
200
380
Wire to 3-phase power supply
Noise filter input terminal
Noise filter output terminal
Servo input terminal
Wire from noise filter to servo
Example of noise terminal voltage attenuation
Noise terminal voltage
[dBuV]
EMI data for independent control panel
(with six-axis servo unit mounted)
Noise terminal voltage
EMI data for control panel + noise filter
(MX13030)
[dBuV]
Output derating
Current (%)
mbient temperature Ta (°C)
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
