2 Instruction List
2.3 Applied Instructions
46
FXCPU Structured Programming Manual
(Basic & Applied Instruction)
*1. The instruction is provided in the FXU PLC Ver. 2.30 or later.
*2. The instruction is provided in the FX
U PLC Ver. 3.07 or later.
*3. The 32-bit operations are provided in the FX
3U and FX3UC PLCs Ver. 2.20 or later.
*4. The instruction is provided in the FX
U PLC Ver. 2.10 or later.
*5. The instruction is provided in the FX
0N PLC Ver. 1.20 or later.
*6. Though programmed, this instruction is not valid because the FX
1NC or FX2NC PLC does not have a
volume to read out under this instruction.
*7. The instruction is provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*8. The instruction is not provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*9. The instruction is provided in the FX
3UC PLC Ver. 2.20 or later.
*10. The instruction is provided in the FX
2N and FX2NC PLCs Ver. 3.00 or later.
*11. The instruction is provided in the FX
3UC PLC Ver. 1.30 or later.
*12. The instruction is provided in the FX
3G PLC Ver. 1.10 or later.
*13. The instruction is provided in the FX
3U and FX3UC PLCs Ver. 2.61 or later.
The FX
3UC-32MT-LT-2 PLC is due to be upgraded later.
Instruction name
Execution
condition
Function
Applicable PLCs
Reference
FX3U(C)
FX3G
FX2N(C)
FX1N(C)
FX1S
FXU/FX2C
FX0N
FX0(S)
Extension File Register Control
LOADR Continuous
Load from ER
33
Section 7.27.1
LOADRP Pulse 33
SAVER Continuous Save to ER 3
Section 7.27.2
INITR Continuous
Initialize R and ER
3
Section 7.27.3
INITRP Pulse 3
LOGR Continuous
Logging R and ER
3
Section 7.27.4
LOGRP Pulse 3
RWER Continuous
Rewrite to ER
*11 3
Section 7.27.5
RWERP Pulse *11 3
INITER Continuous
Initialize ER
*11
Section 7.27.6
INITERP Pulse *11
FX3U-CF-ADP
FLCRT Continuous File create / check *13
Section 7.28.1
FLDEL Continuous File delete / CF card format *13
Section 7.28.2
FLWR Continuous Data write *13
Section 7.28.3
FLRD Continuous Data read *13
Section 7.28.4
FLCMD Continuous CF-ADP command *13
Section 7.28.5
FLSTRD Continuous CF-ADP status read *13
Section 7.28.6