EasyManua.ls Logo

Mitsubishi Electric MELSEC FX Series - Page 47

Mitsubishi Electric MELSEC FX Series
838 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Instruction List
2.3 Applied Instructions
45
FXCPU Structured Programming Manual
(Basic & Applied Instruction)
1
Outline
2
Instruction List
3
Configuration of
Instruction
4
How to Read
Explanation of
Instructions
5
Basic Instruction
6
Step Ladder
Instructions
7
Applied
Instructions
8
Interrupt Function
and Pulse Catch
Function
A
Relationships
between devices
and addresses
*1. The instruction is provided in the FXU PLC Ver. 2.30 or later.
*2. The instruction is provided in the FXU PLC Ver. 3.07 or later.
*3. The 32-bit operations are provided in the FX
3U and FX3UC PLCs Ver. 2.20 or later.
*4. The instruction is provided in the FX
U PLC Ver. 2.10 or later.
*5. The instruction is provided in the FX
0N PLC Ver. 1.20 or later.
*6. Though programmed, this instruction is not valid because the FX
1NC or FX2NC PLC does not have a
volume to read out under this instruction.
*7. The instruction is provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*8. The instruction is not provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*9. The instruction is provided in the FX
3UC PLC Ver. 2.20 or later.
*10. The instruction is provided in the FX
2N and FX2NC PLCs Ver. 3.00 or later.
*11. The instruction is provided in the FX
3UC PLC Ver. 1.30 or later.
*12. The instruction is provided in the FX
3G PLC Ver. 1.10 or later.
*13. The instruction is provided in the FX
3U and FX3UC PLCs Ver. 2.61 or later.
The FX
3UC-32MT-LT-2 PLC is due to be upgraded later.
Instruction name
Execution
condition
Function
Applicable PLCs
Reference
FX3U(C)
FX3G
FX2N(C)
FX1N(C)
FX1S
FXU/FX2C
FX0N
FX0(S)
Data Table Operation
DABIN Continuous
Decimal ASCII to BIN conversion
*9
Section 7.23.5
DABINP Pulse *9
DDABIN Continuous *9
DDABINP Pulse *9
BINDA Continuous
BIN to decimal ASCII conversion
*9
Section 7.23.6
BINDAP Pulse *9
DBINDA Continuous *9
DBINDAP Pulse *9
SCL2 Continuous
Scaling 2
(coordinate by X/Y data)
3
Section 7.23.7
SCL2P Pulse 3
DSCL2 Continuous 3
DSCL2P Pulse 3
External Device Communication (Inverter Communication)
IVCK Continuous Inverter status check 3 *12
Section 7.24.1
IVDR Continuous Inverter drive 3 *12
Section 7.24.2
IVRD Continuous Inverter parameter read 3 *12
Section 7.24.3
IVWR Continuous Inverter parameter write 3 *12
Section 7.24.4
IVBWR Continuous Inverter parameter block write 3
Section 7.24.5
Data Transfer 3
RBFM Continuous Divided BFM read *9
Section 7.25.1
WBFM Continuous Divided BFM write *9
Section 7.25.2
High Speed Processing 2
DHSCT Continuous
High speed counter compare with
data table
3
Section 7.26.1

Table of Contents

Other manuals for Mitsubishi Electric MELSEC FX Series

Related product manuals