Mitsubishi Electric MELSEC FX Series - FX 2 NC -485 ADP and FX 0 N -485 ADP

FX communication
Wiring 3
3-12
3.4.4 FX
2NC
-485ADP and FX
0N
-485ADP
1 ) One-pair Wiring
Note:
*1 Connect the terminal FG to the ground terminal of a programmable controller grounded
with a resistance of 100
Ω
or less (Class D grounding). If the programmable controller is
not equipped with a ground terminal, connect the terminal FG directly to a ground with the
resistance of 100
Ω
or less (Class D grounding).
2 ) Two-pair Wiring
Note:
*1 Connect the terminal FG to the ground terminal of a programmable controller grounded
with a resistance of 100
Ω
or less (Class D grounding). If the programmable controller is
not equipped with a ground terminal, connect the terminal FG directly to a ground with the
resistance of 100
Ω
or less (Class D grounding).
SDB
SDA
RDA
SDA
SDB
RDA
RDB RDB
LINK
SG
FG
*1
FX
0N
-485ADP
FX
2NC
-485ADP
SG
Terminating
resistor
110
Ω
Terminating
resistor
110
Ω
SDB
SDA
RDA
SDA
SDB
RDA
RDB
SG
RDB
LINK
SG
FG
*1
FX
0N
-485ADP
FX
2NC
-485ADP
Terminating
resistor
330
Ω
Terminating
resistor
330
Ω
Terminating
resistor
330
Ω
Terminating
resistor
330
Ω