Mitsubishi Electric MELSEC iQ-F Series - Overview of CC-Link IE TSN

3 CONFIGURING CLIENTS (MQTT PUBLISHER, MQTT SUBSCRIBER)
3.1 Configuring Settings with GX Works3
12
3
3 CONFIGURING CLIENTS (MQTT PUBLISHER,
MQTT SUBSCRIBER)
This chapter describes the setting items for the clients (MQTT Publisher, MQTT Subscriber).
3.1 Configuring Settings with GX Works3
This section describes how to configure the settings with GX Works3.
Procedure for setting parameters
1. Open the "Navigation" window  [Module Configuration]. Drag and drop [FX5-ENET] to add it.
2. Double-click [FX5-ENET] on [Module Configuration]. Click the [Yes] button.
3. Click the [Setting Change] button.
Drag and drop