APPX
Appendix 3 How to Use the Program Copy Function of e-Manual
58
A
Appendix 3 How to Use the Program Copy Function
of e-Manual
Program examples in e-Manual can be copied and pasted to GX Works3.
1. Click "Copy Ladder Program (for GX Works3)" in e-Manual.
2. Right-click the mouse on the ladder editor of GX Works3, and select [Paste].
3. The copied program is pasted in undefined state. Select the FB used in the program example from [Library] on the
"Element Selection" window, and drag and drop it to the FB area on the ladder editor.
When an FB is used in the program example, the definition of the FB will be unclear immediately after the
program is pasted to the ladder editor. Drag and drop the FB from the "Element Selection" window to define
the FB properly.
Unclear definition of FB
Properly defined FB
To Next Page
Loading...
