Mitsubishi Electric MELSEC iQ-F Series - How to Use the FB Library

APPX
Appendix 2 FB Library
56
A
How to use the FB library
Select an FB registered in the library from the "Element Selection" window, and drag and drop it to the program editor. Create
an input ladder and an output ladder of the pasted FB to create a program.
Arrange the FB input ladder to the left side, and output ladder to the right side of the window in the same manner as standard
ladder programs.
1. Go to the "Element Selection" window  the [Library] tab  [Library]. Then, select an FB to be used and drop it in the
program editor. When the "FB Instance Name" window appears, click the [OK] button.
2. The FB is pasted to the program editor.