Mitsubishi Electric MELSEC iQ-F Series - Configuring Settings with Certificate Configuration Tool for FX5-ENET; Writing a Certificate

37
4 CONFIGURING SERVER (MQTT BROKER) CONNECTION
4.2 Configuring Settings with Certificate Configuration Tool for FX5-ENET
4.2 Configuring Settings with Certificate
Configuration Tool for FX5-ENET
Writing a certificate
1. In Certificate Configuration Tool for FX5-ENET, click [Client Certificates]  [Replace] button.
2. Click the [Yes] button.
3. Select the certificate (*.crt) downloaded in Page 32 Creating a certificate and import the certificate.
If the certificate (*.crt) is not displayed, delete the end of the file name (.crt). (The extension will become
.pem.)
4. Click the [Yes] button.