4 CONFIGURING SERVER (MQTT BROKER) CONNECTION
4.3 Configuring Settings with GX Works3
40
4
4.3 Configuring Settings with GX Works3
1. Select the "Navigation" window [Parameter] [Module Information] [FX5-ENET] [Application Settings] [MQTT
Communication Setting] [MQTT Connection Setting] and double-click <Detailed Setting>.
2. Configure the following settings and click the [Apply] button.
3. Configuring the settings with GX Works3 is completed by creating a program and writing it to the programmable
controller.
Page 41 CHECKING OPERATIONS
Page 19 Writing data to the programmable controller
Item Setting
MQTT Server Specification Method Host name
MQTT Server Host Name ********.amazonaws.com (own endpoint)
Enter the endpoint that was copied in the section below.
Page 36 Checking an endpoint
MQTT Server Port No. 8883
Client ID test_things
Enter the name of the thing that was created in the section below.
Page 29 Creating AWS IoT things
Verify Server Certificate Verify
To Next Page
Loading...
